RTK PBDA-300B Automatic plastic biodegradation analyzer

RTK PBDA-300B Automatic plastic biodegradation analyzer



Brand: RTK

Model: RTK PBDA-300


The RTK PBDA-300 plastic biodegradation analyzer is used to test materials as organic compounds under controlled composting conditions to determine their final aerobic biodecomposition capacity and degree of disintegration by measuring the amount of carbon dioxide emitted.


Product introduction
Under controlled composting conditions, plastic samples are degraded to release CO2 gas, CO2 production is tested online in real time by gas sensors, and data is automatically recorded and saved by software. The ratio of the actual CO2 production to the theoretical CO2 production is the biodegradation rate of the sample. It can also monitor the production of O2 or other gases such as CH4, H2S, etc. It is convenient to evaluate and control the whole degradation process.


Technological advantage

For biodegradability analysis of plastics
(1) Meet GB/T19277.1-2011
(2) Meet ISO 14855.1-2012
(3) Meet ASTM D5338
(4) Meet GB/T 20197-2006
(5) Meet EN13432 and EN14046
(6) Meet JIS K6953


System parameter
(1) With exhaust gas recovery device, can pass the environmental assessmen
(2) During the whole experiment cycle, the software automatically measures the data, which greatly saves manpower and ensures the reliability of data
(3) Power data is saved, and the power is automatically tested after starting again
(4) Gas sensor real-time online test of CO2 production in the degradation process of plastic samples
(5) The gas sensor can monitor the O2 content in the reactor, which is convenient for process control
(6) The gas sensor can measure H2S, CH4 and other gases in the degradation process of plastic samples, which is convenient for overall analysis
(7) The mass flowmeter accurately controls the flow into the reactor, and the parallelism is better
(8) The reactor can be controlled at a user-specified temperature, generally 58 ℃
(9) Automatic humidification of air in the reactor
(10) Built-in web server, easy cross-platform access. It can also be accessed and controlled through the host display
(11) Replace the reactor, can expand the test water plastic degradation, meet the standard GB/T 19276.2


Configuration list

(1) One main machine;
(2) 1 software WEB server;
(3) 1 air pressure pump;
(4) 18 reactors;
(5) 1 set of gas sensors;
(6) 19 mass flowmeters
(7) Ultrasonic humidification 1 set
(8) 1 set of automatic mixing system


  • 980 Fuel cell test system (manual back pressure)
  • 980Pro Fuel Cell Test System(Automatic back pressure)