WS-4

Conserve valuable lab space!

A cost effective vibration isolation tablefor weight loads up to 1000 lb. and 1/2 Hz performance vertical and horizontal.

Table Weight: Approximately 134 lb (62 kg) Isolator: Approx. 80 lb (36 kg) Stand: Approx. 54 lb (25 kg)
Dimensions: 24" W x 24" D x 33" H (610mm W x 610mm D x 838mm H)
Approximate payload weight range:
Model	Payload Range*
100WS-4	60 - 100 lb (27 - 48 kg)
150WS-4	90 - 155 lb (41 - 70 kg)
250WS-4	180 - 270 lb (82 - 123 kg)
350WS-4	290 - 370 lb (132 - 168 kg)
500WS-4	360 - 525 lb (164 - 239 kg)
650WS-4	500 - 680 lb (227 - 309 kg)
Weight: Approximately 90 lb (41 kg) - Dimensions - an additional 0.675" taller than the above units
850WS-4	630 - 900 lb (285 - 408 kg)
1000WS-4	890 - 1050 lb (403 - 476 kg)
Performance
Vertical natural frequency of 1/2 Hz or less can be achieved over the entire load range. Horizontal natural frequency is load dependent. 1/2 Hz or less can be achieved at or near the nominal load.
Part#: WS-4 Stand Weight: Approximately 54 lb (25 kg)
Dimensions: 24" W x 24" D x 23" H (610mm W x 610mm D x 533mm H)